调节指导-纸盒扣底成型机carton bottom buckle forming machine
发布时间：
2024-10-19 09:36
自动扣底成型机
操作安全提示
Operation safety tips
a．在操作运行时，必须遵守技术安保的基本条例：
During operation must obey the basic regulations of the technical safety assurance instructions.
b．机器控制箱应当可靠的接地。
The machine control cabinet must be faithfully earthed.
c．工作时禁止任何机构调整。
Forbid to adjust any device during operation.
d．运转时人的任何部位不能伸到主机机构的运行半径内。
All parts of human body are not allowed to be within the radius range of the main machine during operation.
e．非专业人员请不要打开电箱。
Non professional personnel shall not open the electricity box.
2. 保养. 润滑
a. 每天上下班对机器搞好卫生，检查连接螺钉是否松动。
Clean up the machine at the beginning and end of every working day and check whether the connection bolt is loose or not.
b.经常观察机器是否运转正常，是否有异响、异味。
Always observe whether the machine is operating normally or not and whether there is abnormal noise or particular smell.
c．各种关节轴承每周注入1-2滴润滑液。链轮和凸轮每半个月适量注入润滑油一次。
Inject 1-2 drops of lubricant into all kinds of joint bearing every week. Chain wheel and cam wheel shall be lubricated with proper grease once half a month.
d. 每个月对控制系统清理、保养一次。
Clean and maintain once a month for the control system.
回复帮忙寻找帮忙
回复咨询咨询设备
回复招聘等你过来
最新资讯
