首页

11-19多功能装配机到货指导Arrival Guidance for Assembly Machines

发布时间：

2024-10-28 08:17

多功能装配机

多功能装配机到货后操作步骤指导视频

Multifunction Assembly Machine Instruction Video for Operating Procedures After Shipment

操作安全提示

Operation safety tips

1. 注意事项Precautions

a．机器接有380伏/220伏的交流电压，在操作运行时，必须遵守技术安保的基本条例：

The machine is connected to 380V/220V AC voltage. During operation must obey the basic regulations of the technical safety assurance instructions.

b．机器控制箱应当可靠的接地。

The machine control cabinet must be faithfully earthed.

c．工作时禁止任何机构调整。

Forbid to adjust any device during operation.

d．运转时人的任何部位不能伸到主机机构的运行半径内。

All parts of human body are not allowed to be within the radius range of the main machine during operation.

e．非专业人员请不要打开电箱。

Non professional personnel shall not open the electricity box.

2. 保养. 润滑

a. 每天上下班对机器搞好卫生，检查连接螺钉是否松动。

Clean up the machine at the beginning and end of every working day and check whether the connection bolt is loose or not.

b.经常观察机器是否运转正常，是否有异响、异味。

Always observe whether the machine is operating normally or not and whether there is abnormal noise or particular smell.

c．各种关节轴承每周注入1-2滴润滑液。链轮和凸轮每半个月适量注入润滑油一次。

Inject 1-2 drops of lubricant into all kinds of joint bearing every week. Chain wheel and cam wheel shall be lubricated with proper grease once half a month.

d. 每个月对控制系统清理、保养一次。

Clean and maintain once a month for the control system.

↓↓↓

步骤操作目录

Step operation directory

11、灯头振动盘连线电线Connecting wire of lamp cap vibrating plate

12、老化机跟装配机的接电设置Power connection setting of aging machine and assembly machine

13、装配机气源的连接Connection of assembly machine air supply

14、老化机的电源和气源连接Power and air supply connection of aging machine

15、检查机构螺丝有无松动情况Check the mechanism screws for looseness

16、装配机进行测试运行检查Assembly machine for test run inspection

16-1、装配机开机注意Precautions for starting the assembly machine