Mini智能装盒机课程指导
发布时间：
2024-10-22 06:10
RY-Mini系列智能装盒机
操作安全提示
Operation safety tips
a．机器接有220伏/380伏（根据收到设备的电压为准）的交流电压，在操作运行时，必须遵守技术安保的基本条例：
The machine is connected with an AC voltage of 220 volts/380 volts (depending on the voltage received from the equipment). When operating, the basic rules of technical security must be observed:
b．机器控制箱应当可靠的接地。
The machine control cabinet must be faithfully earthed.
c．工作时禁止任何机构调整。
Forbid to adjust any device during operation.
d．运转时人的任何部位不能伸到主机机构的运行半径内。
All parts of human body are not allowed to be within the radius range of the main machine during operation.
e．非专业人员请不要打开电箱。
Non professional personnel shall not open the electricity box.
2. 保养. 润滑
a. 每天上下班对机器搞好卫生，检查连接螺钉是否松动。
Clean up the machine at the beginning and end of every working day and check whether the connection bolt is loose or not.
b.经常观察机器是否运转正常，是否有异响、异味。
Always observe whether the machine is operating normally or not and whether there is abnormal noise or particular smell.
c．各种关节轴承每周注入1-2滴润滑液。链轮和凸轮每半个月适量注入润滑油一次。
Inject 1-2 drops of lubricant into all kinds of joint bearing every week. Chain wheel and cam wheel shall be lubricated with proper grease once half a month.
d. 每个月对控制系统清理、保养一次。
Clean and maintain once a month for the control system.
↓↓↓
操作步骤视频指导
Video guide to operating steps
1-Mini装盒机开机指导mini cartoning machine startup guidance
2-纸盒大小规格调整Carton size specification adjustment
3-纸盒成型状态与机器位置调节Carton forming state and machine position adjustment
4-调整产品与机器物料斗位置Adjust the position of product and machine material hopper
5-产品推料问题分析Analysis of product pushing problems
6-纸盒与链条间距离调节Distance adjustment between carton and chain
7-产品封口问题分析Analysis of product sealing
最新资讯
