下料机+装盒机+袖口套膜收缩机调试视频Loading +cartoning +Cuff Film Shrinking
发布时间：
2023-12-01 15:54
（下料机+智能装盒机+袖口套膜收缩机）
LED光源产业自动化包装线
操作安全提示
Operation safety tips
1. 注意事项Precautions
a．机器接有220伏/380伏（根据收到设备的电压为准）的交流电压，在操作运行时，必须遵守技术安保的基本条例：
The machine is connected with an AC voltage of 220 volts/380 volts (depending on the voltage received from the equipment). When operating, the basic rules of technical security must be observed:
b．机器控制箱应当可靠的接地。
The machine control cabinet must be faithfully earthed.
c．工作时禁止任何机构调整。
Forbid to adjust any device during operation.
d．运转时人的任何部位不能伸到主机机构的运行半径内。
All parts of human body are not allowed to be within the radius range of the main machine during operation.
e．非专业人员请不要打开电箱。
Non professional personnel shall not open the electricity box.
2. 保养. 润滑
a. 每天上下班对机器搞好卫生，检查连接螺钉是否松动。
Clean up the machine at the beginning and end of every working day and check whether the connection bolt is loose or not.
b.经常观察机器是否运转正常，是否有异响、异味。
Always observe whether the machine is operating normally or not and whether there is abnormal noise or particular smell.
c．各种关节轴承每周注入1-2滴润滑液。链轮和凸轮每半个月适量注入润滑油一次。
Inject 1-2 drops of lubricant into all kinds of joint bearing every week. Chain wheel and cam wheel shall be lubricated with proper grease once half a month.
d. 每个月对控制系统清理、保养一次。
Clean and maintain once a month for the control system.
步骤顺序指导课程Step Sequence Guidance Course
↓↓↓
1、按照设备从左往右（下料机+装盒机+袖口套膜机+收缩机）顺序进行摆放Arrange the equipment in order from left to right (Loading Machine+packaging machine+sleeve film machine+shrinking machine)
2、设备连接处位置安装（下料器与装盒机物料斗连接处安装、装盒机与输送皮带连接处安装、输送皮带与袖口套膜机连接处安装）Installation of equipment connection position (installation at the connection between the feeder and the material hopper of the packaging machine, installation at the connection between the packaging machine and the conveyor belt, installation at the connection between the conveyor belt and the sleeve film machine)
2.1-下料器与装盒机物料斗连接处安装installation at the connection between the feeder and the material hopper of the packaging machine
2.3-输送皮带与袖口套膜机连接处安装installation at the connection between the conveyor belt and the sleeve film machine
3、下料机、装盒机、袖口套膜收缩机开机指导(接通电源线/气源线、电源开关、控制面板基本操作，产品试运行）Start up guide for the cutting machine, packaging machine, and cuff film shrinking machine (connect the power/air supply line, power switch, basic operation of the control panel, and product trial operation)
3.1-下料机开机指导Guidance for starting up the feeding machine
3.2-装盒机开机指导Guidance for starting up the cartoning machine
3.3袖口套膜收缩机开机指导Boot guide for cuff film shrinking machine
4、如果产品需要切换规格的话，需要调试哪些地方If the specification of the product needs to be changed, what parts need to be debugged
下料机调试视频指导Video guide for debugging the Unloader
智能装盒机调节教程Intelligent Boxing Machine Adjustment Tutorial
袖口套膜收缩机调试视频指导Debugging guide for cuff film shrinking machine
5、产品批量生产Mass production of products
最新资讯
