下料器+智能装盒机（含喷胶）调换规格课程指导 feeder+ boxing ( glue spraying)
发布时间：
2023-12-02 11:45
下料器+智能装盒机（含喷胶）
操作安全提示
Operation safety tips
a．机器接有220伏的交流电压，在操作运行时，必须遵守技术安保的基本条例：
The machine is connected to 220V AC voltage. During operation must obey the basic regulations of the technical safety assurance instructions.
b．机器控制箱应当可靠的接地。
The machine control cabinet must be faithfully earthed.
c．工作时禁止任何机构调整。
Forbid to adjust any device during operation.
d．运转时人的任何部位不能伸到主机机构的运行半径内。
All parts of human body are not allowed to be within the radius range of the main machine during operation.
e．非专业人员请不要打开电箱。
Non professional personnel shall not open the electricity box.
2. 保养. 润滑
a. 每天上下班对机器搞好卫生，检查连接螺钉是否松动。
Clean up the machine at the beginning and end of every working day and check whether the connection bolt is loose or not.
b.经常观察机器是否运转正常，是否有异响、异味。
Always observe whether the machine is operating normally or not and whether there is abnormal noise or particular smell.
c．各种关节轴承每周注入1-2滴润滑液。链轮和凸轮每半个月适量注入润滑油一次。
Inject 1-2 drops of lubricant into all kinds of joint bearing every week. Chain wheel and cam wheel shall be lubricated with proper grease once half a month.
d. 每个月对控制系统清理、保养一次。
Clean and maintain once a month for the control system.
↓↓↓
操作步骤视频指导
Video guide to operating steps
1、纸盒库调节Paper Box Library Adjustment
4、推料位置调节Pushing position adjustment
5、物料斗调节Material hopper adjustment
6、纸盒侧页导向封口位置调整Adjustment of the position of the guide seal on the side page of the cardboard box
7、喷胶机开机指导Boot guide for glue sprayer
8、喷胶射程及喷胶封盒位置调整Adjustment of spray range and spray box position
9、下料器护栏与产品间距离调整Adjustment of the distance between the feeder guardrail and the product
10、下料器与装盒机物料斗连接位置调整Adjustment of the connection position between the feeder and the material hopper
最新资讯
